MM74HC74ASJX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 218.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 94MHz |
| Propagation Delay | 19 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 40 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HC74ASJX Overview
It is embeded in 14-SOIC (0.209, 5.30mm Width) case. A package named Tape & Reel (TR)includes it. There is a Differentialoutput configured with it. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. -40°C~85°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74HC series. There should be no greater frequency than 94MHzon its output. 14terminations have occurred. It is a member of the 74HC74 family. The power source is powered by 4.5V. A 5pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of HC/UH. Electronic part Surface Mountis mounted in the way. As you can see from the design, it has pins with 14. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 6V. A normal operating voltage (Vsup) should remain above 2V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There are no output lines on the JK flip flop. In terms of quiescent current, it consumes 4μA . Currently, there are 2 channels available.
MM74HC74ASJX Features
Tape & Reel (TR) package
74HC series
14 pins
MM74HC74ASJX Applications
There are a lot of ON Semiconductor MM74HC74ASJX Flip Flops applications.
- Individual Asynchronous Resets
- Bus hold
- Set-reset capability
- High Performance Logic for test systems
- Frequency Divider circuits
- ESD protection
- Event Detectors
- Instrumentation
- ESD performance
- Latch
