MM74HCT138MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 22 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT138 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 50 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 4.8mA 4.8mA |
| Supply Type | Single |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT138MTCX Overview
Due to the lack of space on the board, digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width).The package is packaged in accordance with Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HCT series are suitable for a wide range of applications.Among its basic configurations are 16 terminations.To find signal switch's related components, a base part number of 74HCT138 may also be used.The turn signal switch is supplied with a voltage of 5V volts.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.This multiplexer ic is configured with 16 pins.The mounting is in the way of Surface Mount.In the HCT family, the logic switch is included.A power supply is provided for mux switch's normal operation of 5V.This is an the digital switch ic that is classified as Decoder/Drivers.Without the influence of external factors, it consumes 8μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches package is packaged in a way which is consistent with TAPE AND REEL.It is possible to accept voltage levels by using one of the 3 input lines of multiplexers.There are 8 output lines designed to serve as the source of the signal.
MM74HCT138MTCX Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
3 input lines
8 output lines
MM74HCT138MTCX Applications
There are a lot of ON Semiconductor MM74HCT138MTCX Signal Switches / Multiplexers / Decoders applications.
- Communication system
- GLAN
- Signal router
- Enabling different functions units in microprocessor instruction decoding
- A/D converters
- Image transmission
- Code converters
- CPU memory location identification
- Medium scale TV wall
- PCIe
