MM74HCT273WM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 4.8mA |
| Number of Bits | 8 |
| Clock Frequency | 68MHz |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 22 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Number of Inputs | 8 |
| Current - Output High, Low | 4.8mA 4.8mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 37ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.642mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT273WM Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. In the configuration, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74HCT series. Its output frequency should not exceed 68MHz. In total, it contains 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. The 74HCT273 family contains this object. An input voltage of 5Vpowers the D latch. A 6pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HCT. Electronic part Surface Mountis mounted in the way. This board has 20 pins. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. It runs on 5Vvolts of power. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. As a result of its output current of 4.8mA, it is very flexible in terms of design. A total of 8 channels are available. There are 8 inputs used.
MM74HCT273WM Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT273WM Applications
There are a lot of ON Semiconductor MM74HCT273WM Flip Flops applications.
- Computers
- CMOS Process
- Single Up Count-Control Line
- Event Detectors
- Patented noise
- Latch
- Bounce elimination switch
- Asynchronous counter
- Consumer
- Frequency division
