MM74HCT373WM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 50MHz |
| Base Part Number | 74HCT373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.2mA |
| Max Supply Current | 1mA |
| Number of Bits | 8 |
| Propagation Delay | 56 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.2mA 7.2mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
MM74HCT373WM Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. As a result, it has a packaging of Tube. It uses Tri-State as the output. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. The 74HCT series contains FPGAs of this type. An electronic part with 8 bits is designed. This device is designed with 20 terminations. It belongs to 74HCT373 family. With the supply voltage set at 5V, it is able to operate. HCT is the family name of this electronic device. The pin configuration of the device is 20. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. Subcategory FF/Latches contains this part. There are 5V power supplies attached to it. The 7.2mA output current gives it maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. There are 3 output lines that correspond to the binary equivalents of the input line. Without external influences, it consumes 1mA quiescent current. The superior flexibility of this circuit can be attributed to the use of 8 circuits.
MM74HCT373WM Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pins
5V power supplies
MM74HCT373WM Applications
There are a lot of ON Semiconductor MM74HCT373WM Latches applications.
- Parallel data storage
- OC-48 communication systems
- Avionics
- Serial Output Register
- Buffer/Storage Registers
- PCs and Notebooks
- Frequency dividing
- Automotive Body Electronics
- Automatic test equipment
- Shift Registers
