MM74HCT373WMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.2mA 7.2mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Height | 2.34mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT373WMX Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Tape & Reel (TR) is the way it is packaged. It uses the output configuration Tri-State. D-Type Transparent Latch is the logic type of this electrical device. This electronic part is mounted in the way of Surface Mount. There is no supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74HCT series contains FPGAs of this type. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations that have been designed. It is a member of the 74HCT373 family. A 5V voltage supply is required for operation. HCT is the family of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. The part belongs to the FF/Latches subcategory. It operates from 5V power supplies. Electronic circuits are represented by 3 input lines. As a result of its reliable performance, it is well suited for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. As far as external factors are concerned, it consumes 1mA of quiescent current without getting affected by them.
MM74HCT373WMX Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pins
5V power supplies
MM74HCT373WMX Applications
There are a lot of ON Semiconductor MM74HCT373WMX Latches applications.
- Counter timers
- Data acquisition
- Flip-flops
- Serial Input
- Four-bit storage with output enable
- Motor Drives
- General-Purpose Register
- Parallel data synchronization
- Shift right register
- Pattern generators
