MM74HCT374MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 46 ns |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 46ns @ 5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 24000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT374MTC Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. The package Tubecontains it. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74HCT series. It should not exceed 30MHzin its output frequency. A total of 1 elements are present. As a result, it consumes 8μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. It is a member of the 74HCT374 family. A voltage of 5V is used to power it. A JK flip flop with a 10pFfarad input capacitance is used here. Electronic devices of this type belong to the HCTfamily. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. It is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. Due to its superior flexibility, it uses 8 circuits. The power supply is 5V. A D flip flop with 2embedded ports is available. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It operates with 3 output lines.
MM74HCT374MTC Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT374MTC Applications
There are a lot of ON Semiconductor MM74HCT374MTC Flip Flops applications.
- QML qualified product
- Latch-up performance
- Data Synchronizers
- Storage registers
- Test & Measurement
- Shift registers
- Computers
- Communications
- Dynamic threshold performance
- Balanced Propagation Delays
