MM74HCT374N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.26g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | Through Hole |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Output Current | 7.2mA |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 46 ns |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max Propagation Delay @ V, Max CL | 46ns @ 5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 26.075mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
MM74HCT374N Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 30MHzin the output frequency of the device. A total of 1 elements are present. As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 20 terminations. This D latch belongs to the family of 74HCT374. The power supply voltage is 5V. This T flip flop has a capacitance of 10pF farads at the input. Devices in the HCTfamily are electronic devices. There is an electronic part mounted in the way of Through Hole. It is designed with 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There are 8bits in this flip flop. Vsup reaches 5.5V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 4.5V. The superior flexibility of this product is achieved by using 8 circuits. The flip flop has 2ports embedded within it. With a current output of 7.2mA , it offers maximum design flexibility. In order for the chip to function, it has 3output lines.
MM74HCT374N Features
Tube package
74HCT series
20 pins
8 Bits
MM74HCT374N Applications
There are a lot of ON Semiconductor MM74HCT374N Flip Flops applications.
- Balanced Propagation Delays
- Common Clocks
- Guaranteed simultaneous switching noise level
- Data transfer
- Storage registers
- Pattern generators
- Communications
- Memory
- Parallel data storage
- Frequency Divider circuits
