MM74HCT374SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 46 ns |
| Turn On Delay Time | 30 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max Propagation Delay @ V, Max CL | 46ns @ 5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HCT374SJ Overview
The flip flop is packaged in 20-SOIC (0.209, 5.30mm Width). It is included in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 30MHz. D latch consists of 1 elements. During its operation, it consumes 8μA quiescent energy. The 74HCT374 family contains this object. A JK flip flop with a 10pFfarad input capacitance is used here. It is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. Due to its superior flexibility, it uses 8 circuits. In order to ensure high efficiency, the supply voltage should remain at 5V. It operates with 3 output lines.
MM74HCT374SJ Features
Tube package
74HCT series
20 pins
MM74HCT374SJ Applications
There are a lot of ON Semiconductor MM74HCT374SJ Flip Flops applications.
- CMOS Process
- Functionally equivalent to the MC10/100EL29
- EMI reduction circuitry
- Convert a momentary switch to a toggle switch
- QML qualified product
- Latch-up performance
- Individual Asynchronous Resets
- Power down protection
- Set-reset capability
- Guaranteed simultaneous switching noise level
