MM74HCT374WMX
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 57 ns |
| Turn On Delay Time | 30 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 46ns @ 5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
MM74HCT374WMX Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. A supply voltage of 4.5V~5.5V is required for operation. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74HCT series. There should be no greater frequency than 30MHzon its output. There are 1 elements in it. Despite external influences, it consumes 8μAof quiescent current. A total of 20terminations have been recorded. You can search similar parts based on 74HCT374. A voltage of 5V is used to power it. JK flip flop input capacitance is 10pF farads. It is a member of the HCTfamily of D flip flop. It is mounted in the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. Due to its superior flexibility, it uses 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are 5V power supplies attached to it. The flip flop contains 2ports. High efficiency requires the supply voltage to be maintained at 5V. There are 3 output lines on it.
MM74HCT374WMX Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT374WMX Applications
There are a lot of ON Semiconductor MM74HCT374WMX Flip Flops applications.
- QML qualified product
- Data storage
- Pattern generators
- Data transfer
- Bus hold
- Storage Registers
- Convert a momentary switch to a toggle switch
- ATE
- Buffer registers
- Patented noise
