banner_page

MM74HCT573MTC

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MM74HCT573MTC
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 592
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT573 DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 191mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2005
Series 74HCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature BROADSIDE VERSION OF 373
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74HCT573
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 30 ns
Turn On Delay Time 17 ns
Family HCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 7.2mA 7.2mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.0072 A
Number of Input Lines 8
Independent Circuits 1
Height 900μm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MM74HCT573MTC Overview


In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A package of Tube has been used. It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. It operates at -40°C~85°C degrees Celsius. An FPGA of this type belongs to the 74HCT series. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family it belongs to is 74HCT573. The device works with a voltage of 5V for its supply voltage. HCT is the family of this electronic device. With the design of the board, there are only 20 pins. This electronic part is mounted in the way of Surface Mount. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. The device is powered by 5V power supplies. It contains 8 input lines where electronic circuits are present. For maximum efficiency, the supply voltage should be set to 5V. There are also other characteristics of it, such as BROADSIDE VERSION OF 373.

MM74HCT573MTC Features


20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pins
5V power supplies

MM74HCT573MTC Applications


There are a lot of ON Semiconductor MM74HCT573MTC Latches applications.

  • Avionics
  • Automatic test equipment
  • Up/down difference counting
  • Registers
  • Clocks
  • Buffer/Storage Registers
  • Pattern generators
  • Multi-line decoders
  • Multistage ripple counting
  • Stacked or Push-Down Registers

Write a review

Note: HTML is not translated!
    Bad           Good