banner_page

MM74HCT573N

4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MM74HCT573N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 629
  • Description: 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HCT
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
Terminal Finish MATTE TIN
Additional Feature BROADSIDE VERSION OF 373
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT APPLICABLE
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT APPLICABLE
Pin Count 20
JESD-30 Code R-PDIP-T20
Qualification Status COMMERCIAL
Output Type Tri-State
Circuit 8:8
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Number of Ports 2
Number of Bits 8
Family HCT
Output Characteristics 3-STATE
Current - Output High, Low 7.2mA 7.2mA
Logic Type D-Type Transparent Latch
Output Polarity TRUE
Independent Circuits 1
Delay Time - Propagation 17ns
Height Seated (Max) 5.08mm
Length 26.075mm
Width 7.62mm
RoHS Status ROHS3 Compliant

MM74HCT573N Overview


In the package 20-DIP (0.300, 7.62mm), it can be found. It is packaged in the way of Tube. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Through Hole. It operates with a supply voltage of 4.5V~5.5V. It operates at -40°C~85°C degrees Celsius. In the 74HCT series, this FPGA is located. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations that have been designed. The supply voltage of the device is 5V. The device is equipped with 20 pins. It is a member of the HCT family of electronic devices. This device is equipped with 2 ports. It reaches 5.5V when the supply voltage (Vsup) reaches maximum. It is recommended that the supply voltage (Vsup) be greater than 4.5V. Additionally, it is characterized by BROADSIDE VERSION OF 373.

MM74HCT573N Features


20-DIP (0.300, 7.62mm) package
74HCT series
8 Bits
20 pin count

MM74HCT573N Applications


There are a lot of Rochester Electronics, LLC MM74HCT573N Latches applications.

  • Decade counting 7-segment decimal display
  • Shift right register
  • Parallel-to-Serial Data Conversion
  • OC-48 communication systems
  • Pattern generators
  • Parallel Input
  • Shift right with parallel loading
  • Registers
  • Shift Registers
  • Frequency dividing

Write a review

Note: HTML is not translated!
    Bad           Good