MM74HCT574MTC
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 33MHz |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
MM74HCT574MTC Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74HCT series. It should not exceed 33MHzin its output frequency. In total, there are 1 elements. T flip flop consumes 8μA quiescent energy. A total of 20terminations have been recorded. JK flip flop belongs to 74HCT574 family. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 10pF farads. A device of this type belongs to the family of HCT. Electronic part Surface Mountis mounted in the way. A total of 20pins are provided on this board. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. The design is based on 8bits. Its flexibility is enhanced by 8 circuits. The power supply is 5V. The flip flop has 2ports embedded within it. For high efficiency, the supply voltage should be set to 5V. To operate, the chip has a total of 3 output lines.
MM74HCT574MTC Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT574MTC Applications
There are a lot of ON Semiconductor MM74HCT574MTC Flip Flops applications.
- Data transfer
- Dynamic threshold performance
- Patented noise
- Automotive
- Set-reset capability
- Buffer registers
- Count Modes
- Synchronous counter
- Shift Registers
- Data Synchronizers
