MM74HCT574WM
| Parameters | |
|---|---|
| Height | 2.642mm |
| Length | 13.01mm |
| Width | 7.595mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.2mA |
| Number of Bits | 8 |
| Clock Frequency | 33MHz |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max I(ol) | 0.0072 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
MM74HCT574WM Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The 74HCTseries comprises this type of FPGA. There should be no greater frequency than 33MHzon its output. A total of 1elements are present in it. As a result, it consumes 8μA quiescent current. There are 20 terminations,If you search by 74HCT574, you will find similar parts. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 10pF farads at the input. In terms of electronic devices, this device belongs to the HCTfamily of devices. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 8. The system runs on a power supply of 5V watts. A D flip flop with 2embedded ports is available. In order to ensure high efficiency, the supply voltage should remain at 5V. With an output current of 7.2mA, it is possible to design the device in any way you want. In order to operate, the chip has 3 output lines. Currently, there are 8 channels available.
MM74HCT574WM Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT574WM Applications
There are a lot of ON Semiconductor MM74HCT574WM Flip Flops applications.
- Data Synchronizers
- Communications
- Balanced Propagation Delays
- Data storage
- Counters
- Cold spare funcion
- Circuit Design
- QML qualified product
- Bounce elimination switch
- Guaranteed simultaneous switching noise level
