MM74HCT74M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 150mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4.8mA |
| Clock Frequency | 27MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4.8mA 4.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.5mm |
| Length | 8.74mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT74M Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. It is included in the package Tube. This output is configured with Differential. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typeis the type of this D latch. FPGAs belonging to the 74HCTseries contain this type of chip. Its output frequency should not exceed 27MHz Hz. There have been 14 terminations. Members of the 74HCT74family make up this object. A voltage of 5V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 5pF farads. In this case, the D flip flop belongs to the HCTfamily. The electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. Due to its reliability, this T flip flop is well suited for RAIL. A total of 5V power supplies are needed to run it. If high efficiency is desired, the supply voltage should be kept at 5V. Its output current of 4.8mAallows for maximum design flexibility. It is designed with 1 output lines. It consumes a total of 2μA quiescent current at any given time. It is of 2 channels.
MM74HCT74M Features
Tube package
74HCT series
14 pins
5V power supplies
MM74HCT74M Applications
There are a lot of ON Semiconductor MM74HCT74M Flip Flops applications.
- Pattern generators
- Patented noise
- 2 – Bit synchronous counter
- Load Control
- EMI reduction circuitry
- Supports Live Insertion
- Data storage
- Frequency division
- Clock pulse
- Frequency Divider circuits
