MM74HCT74MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 27MHz |
| Propagation Delay | 35 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4.8mA 4.8mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT74MTCX Overview
The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. This output is configured with Differential. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74HCTseries contain this type of chip. There should be no greater frequency than 27MHzon its output. The number of terminations is 14. It is a member of the 74HCT74 family. It is powered by a voltage of 5V . Its input capacitance is 5pFfarads. The electronic device belongs to the HCTfamily. This electronic part is mounted in the way of Surface Mount. It is designed with 14 pins. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. In order to ensure high efficiency, the supply voltage should remain at 5V. There are 1 output lines in this JK flip flop. Despite external influences, it consumes 2μAof quiescent current.
MM74HCT74MTCX Features
Tape & Reel (TR) package
74HCT series
14 pins
5V power supplies
MM74HCT74MTCX Applications
There are a lot of ON Semiconductor MM74HCT74MTCX Flip Flops applications.
- Storage registers
- Synchronous counter
- Buffer registers
- Count Modes
- Data Synchronizers
- Shift Registers
- Control circuits
- Bus hold
- Common Clocks
- Individual Asynchronous Resets
