MM74HCT74N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Output Current | 4.8mA |
| Clock Frequency | 27MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4.8mA 4.8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Gates | 2 |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 44 ns |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT74N Overview
The package is in the form of 14-DIP (0.300, 7.62mm). The package Tubecontains it. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Positive Edge. Through Holeis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74HCT series. You should not exceed 27MHzin its output frequency. There is a consumption of 2μAof quiescent energy. A total of 14terminations have been recorded. Power is supplied from a voltage of 5V volts. This T flip flop has a capacitance of 5pF farads at the input. Devices in the HCTfamily are electronic devices. The electronic flip flop is designed with pins 14. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be kept above 4.5V for normal operation. The output current of 4.8mA makes it feature maximum design flexibility. There are 2 gates in its basic building block.
MM74HCT74N Features
Tube package
74HCT series
14 pins
2 gates
MM74HCT74N Applications
There are a lot of Rochester Electronics, LLC MM74HCT74N Flip Flops applications.
- Buffered Clock
- Automotive
- Latch
- Modulo – n – counter
- Guaranteed simultaneous switching noise level
- Balanced Propagation Delays
- Counters
- ATE
- ESCC
- Bounce elimination switch
