MM74HCT74SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 27MHz |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 4.8mA 4.8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| fmax-Min | 50 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MM74HCT74SJ Overview
It is packaged in the way of 14-SOIC (0.209, 5.30mm Width). A package named Tubeincludes it. Currently, the output is configured to use Differential. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HCT series. There should be no greater frequency than 27MHzon its output. This process consumes 2μA quiescents. The number of terminations is 14. You can search similar parts based on 74HCT74. It is powered by a voltage of 5V . JK flip flop input capacitance is 5pF farads. In this case, the D flip flop belongs to the HCTfamily. In this case, the electronic component is mounted in the way of Surface Mount. This board has 14 pins. This device's clock edge trigger type is Positive Edge. 2 circuits are used to achieve its superior flexibility. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. There are 1 output lines on it.
MM74HCT74SJ Features
Tube package
74HCT series
14 pins
MM74HCT74SJ Applications
There are a lot of ON Semiconductor MM74HCT74SJ Flip Flops applications.
- Buffered Clock
- Asynchronous counter
- Load Control
- Single Up Count-Control Line
- Frequency Divider circuits
- Computing
- Circuit Design
- Modulo – n – counter
- Test & Measurement
- Consumer
