MP110GPR
| Parameters | |
|---|---|
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads, Exposed Pad |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 900V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1.7mA |
| Voltage - Supply (Vcc/Vdd) | 9V~20V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Input Voltage (Max) | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 50 % |
| Isolation | Non-Isolated |
| Output Isolation | Isolated |
| Voltage - Start Up | 11.7V |
| Height Seated (Max) | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
MP110GPR Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads, Exposed Pad .In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.Switching frequency reaches Up to 300kHz Hz.This AC/DC converter is designed for use within the range of 9V~20V supply voltage (Vcc/Vdd).A total of 7 terminations have been recorded.Approximately 7 pins are present on the ac/dc converter.Suitable mounting is provided by Through Hole .There are 1 outputs to be processed.The voltage output by this AC/DC converter is 900V .On the basis of a unique technique, the input voltage can be ensured to be 20V .
MP110GPR Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads, Exposed Pad
Switching Frequency at Up to 300kHz
With 7 pins
MP110GPR Applications
There are a lot of Monolithic Power Systems Inc. MP110GPR AC DC Converters applications.
- LED Driver
- AC?DC USB chargers for Cameras
- Home Appliance Applications
- AC/DC Adaptors/Chargers for Cell Phones
- ZigBee
- PDAs
- Cleaners
- White goods
- Adapter/Charger for Cordless Phones
- Adapter/Charger for Cell
