MP1528DK-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 400kHz |
| Number of Outputs | 1 |
| Max Output Current | 20mA |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Output Current | 20mA |
| Max Supply Current | 800μA |
| Voltage - Output | 36V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 36V |
| Output Current per Channel | 950mA |
| Current - Output / Channel | 950mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 36V |
| Voltage - Supply (Min) | 2.7V |
| Nominal Input Voltage (DC) | 5V |
| RoHS Status | ROHS3 Compliant |
MP1528DK-LF-P Overview
There is also a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package that is used to save space on the board. The LED driver's design uses 1 outputs.To mount, use Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.LED drivers capable of operating at -40°C~85°C TA can be used.Backlight provides many benefits.400kHz is the frequency in which it operates.A voltage supply less than 2.7V will cause undetermined failures.There is a device mounted on the Surface Mount.An acceptable maximum value for the supply voltage is 36V.Its output voltage is 36V.There is a maximum value of 36V supply voltage supported by this device. At a voltage of 2.7V, it operates at a minimal input voltage.There is 36V maximum value for supply current.If the maximum current supply is less than 800μA, this device provides high efficiency.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.There is no current that can be supplied to the load.Stable operation requires a temperature greater than -40°C.LED drivers deliver all their benefits with a maximum output current of 20mA.There are 1 transmission channels available.
MP1528DK-LF-P Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 400kHz
MP1528DK-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP1528DK-LF-P LED Driver ICs applications.
- Down lighting
- Dimmable LED for vehicle interiors
- Gallery lighting
- Architectural lighting
- Sports Facility Lighting
- Stage Lighting and Signage
- Amusement Machines
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Museum lighting
