MP1528DQ-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Number of Pins | 6 |
| Supplier Device Package | 6-QFN (3x3) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Number of Outputs | 1 |
| Max Supply Voltage | 36V |
| Power Dissipation | 2.5W |
| Max Supply Current | 800μA |
| Voltage - Output | 36V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 950mA |
| Current - Output / Channel | 950mA Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 9 |
| Voltage - Supply (Max) | 36V |
| Voltage - Supply (Min) | 2.7V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP1528DQ-LF-P Overview
There is also a 6-VDFN Exposed Pad package that is used to save space on the board. As part of the design of this LED driver, there are 1 outputs that have been used.Mounting is done according to the Surface Mount method.When it emerges as a DC DC Regulator, it shows high-performance and reliability.It is possible for the led driver ic to function normally at -40°C~85°C TA.Backlight provides many benefits.The configuration of the board is built around 6 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.It is estimated that there are 9 segments.Surface Mount is mounted on it.In this case, 36V is acceptable.The device has a voltage output of 36V volts.The supply voltage is optimized to offer a maximum value of 36V.When the maximum supply current is below 800μA, the device can deliver high efficiency.It is important not to exceed 85°C in order to ensure stable operation.The operating temperature should be higher than -40°C so as to realize stable operation.
MP1528DQ-LF-P Features
Available in the 6-VDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
MP1528DQ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP1528DQ-LF-P LED Driver ICs applications.
- Amusement Machines
- Street lighting
- Sports Facility Lighting
- Constant Voltage Power Source for portable equipment
- Architectural lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Portable lighting
- General lighting
- Medical surgery lighting
- Dimmable LED for vehicle interiors
