Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-5 Thin, TSOT-23-5 |
Number of Pins |
5 |
Supplier Device Package |
TSOT-23-5 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Cut Tape (CT) |
Published |
2014 |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Power (Watts) |
6W |
Max Power Dissipation |
6W |
Number of Outputs |
1 |
Efficiency |
75 % |
Max Output Current |
360mA |
Operating Supply Voltage |
6.5V |
Max Supply Voltage |
500V |
Operating Supply Current |
4.5mA |
Output Current |
360mA |
Voltage - Supply (Vcc/Vdd) |
4.45V~4.6V |
Output Power |
6W |
Topology |
Boost, Buck, Buck-Boost, Flyback |
Max Input Voltage |
500V |
Max Output Power |
6W |
Internal Switch(s) |
Yes |
Fault Protection |
Open Loop, Over Load, Over Temperature, Short Circuit |
Output Isolation |
Non-Isolated |
Voltage - Breakdown |
500V |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MP157GJ-P Overview
There is a ac to dc converter embedded in package SOT-23-5 Thin, TSOT-23-5 .The AC/DC power converter Cut Tape (CT) is available for this product.It is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.This AC/DC converter is designed for use within the range of 4.45V~4.6V supply voltage (Vcc/Vdd).Approximately 5 pins are present on the ac/dc converter.The ac dc converters is suitable for mounting by Surface Mount .There are 1 outputs to be processed.360mA is set as the output current.There is a possibility of powering the AC to DC converter under a voltage of 500V .It is assumed that a coverter generates 6W as its output power.During a 6.5V -voltage supply, the interface IC conducts.There is a TSOT-23-5 case to pack the power AC DC.When the maximum 125°C is set, the AC to DC power converter runs steadily.Temperatures below -40°C degrees Celsius are not permitted for this isolated switch.With a maximum output power of 6W , the AC to DC power converter can be used.
MP157GJ-P Features
Packaged with SOT-23-5 Thin, TSOT-23-5
With 5 pins
Output Current at 360mA
Operating Supply Voltage at the range of 6.5V
MP157GJ-P Applications
There are a lot of Monolithic Power Systems Inc. MP157GJ-P AC DC Converters applications.
- Networking
- Set-top boxes
- Adapters
- Low-Voltage I/O System Power
- Smartphones
- Consumer electronics
- DVD players
- Home appliances
- Vacuum Cleaner
- Tablets