MP2459GJ-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Output Voltage | 52.25V |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Operating Supply Voltage | 55V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 52.25V |
| Voltage - Output (Min/Fixed) | 0.81V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 480kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 810mV |
| Voltage - Output (Max) | 52.25V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP2459GJ-Z Overview
optimized performance is achieved by utilizing the Cut Tape (CT) package in this voltage regulator. A voltage regulator consists of 6 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. Space savings are achieved by placing this voltage regulator in the SOT-23-6 Thin, TSOT-23-6 package. A total of 1 outputs are configured in this voltage regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. This voltage regulator 12v should operate at a temperature of -40°C~125°C TJ when operating. In this voltage regulator 12v, the switching frequency is 480kHz. Despite its low input voltage, this voltage regulator can operate. The adjusting voltage regulator's output voltage (Min/Fixed) is 0.81V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 12V. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. There is a possibility that DC DC switching regulator can give voltage at 52.25V volts. In order to operate voltage regulator, 6 pins are required. Ideally this switch regulator should have an output voltage of about 810mV at the very least. A maximum output current of 500mA A is available to meet the switching regulator operation requirements. 52.25V's maximal output voltage allows adjusting voltage regulator to operate easily. There is a maximum output voltage of 52.25V from this voltage regulator 12v. With a supply voltage of 55V, this harley voltage regulator works.
MP2459GJ-Z Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 55V
MP2459GJ-Z Applications
There are a lot of Monolithic Power Systems Inc. MP2459GJ-Z Voltage Regulators applications.
- Printing equipment
- ATMs
- USB circuits
- Hydro power
- Pipe bending machines
- Electric heating, lighting
- Adjustable voltage or current linear circuits
- Industrial robots
- Mobile phones
- Linear guide
