MP2481DH-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Supplier Device Package | 8-MSOP-EP |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Automotive, Backlight, Lighting |
| Frequency | 1.4MHz |
| Number of Outputs | 1 |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Output Current | 1.2A |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 36V |
| Output Current per Channel | 1.2A |
| Current - Output / Channel | 1.2A |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 1.4MHz |
| Voltage - Supply (Max) | 36V |
| Voltage - Supply (Min) | 4.5V |
| Nominal Input Voltage (DC) | 12V |
| RoHS Status | ROHS3 Compliant |
MP2481DH-LF-P Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad saves board space. LED drivers design with 1 outputs.The mounting method adopted is Surface Mount.In this case, the DC DC Regulator emerges as highly efficient and reliable.The LED driver is capable of operating at a temperature of -40°C~125°C TJ.It is clear that Automotive, Backlight, Lighting will benefit from the program.As a result, it operates in accordance with the frequency of 1.4MHz.It is inevitable that there will be undetermined failures when the supply voltage is less than 4.5V.This is mounted by Surface Mount.36V is a maximum acceptable voltage for the supply.In this case, the maximum value will be 36V.At a voltage of 4.5V, it operates at a minimal input voltage.In the case of supply current, there is a maximum value of 36V.It is important not to exceed 125°C in order to ensure stable operation.In this case, the load can only be supplied with 1.2A current.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.As long as the switching frequency is maintained at 1.4MHz, this electronic component is able to perform all of its functions properly.At maximum output current 1.2A, it will deliver all the benefits of a LED driver.Transmissions are currently available on 1 channels.
MP2481DH-LF-P Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 1.4MHz
Switching frequency of 1.4MHz
MP2481DH-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP2481DH-LF-P LED Driver ICs applications.
- Portable lighting
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lights
- General lighting
- Flicker-free LED Lighting using R1580N
- Street lighting
- Stage Lighting and Signage
- LED backlight driver for LCD displays for Tablets and Note PCs
- Auxiliary lights for on-vehicle cameras
