MP2735DQG-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFQFN |
| Number of Pins | 10 |
| Supplier Device Package | 10-QFN (1.8x1.4) |
| Weight | 7.002332mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 450mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 208mW |
| Operating Supply Voltage | 3V |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.3V |
| Min Supply Voltage | 2.7V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 36 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 50MHz |
| On-State Resistance (Max) | 450mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 40nA |
| Channel Capacitance (CS(off), CD(off)) | 55pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 36ns, 30ns |
| Channel-to-Channel Matching (ΔRon) | 10mOhm |
| Crosstalk | -70dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP2735DQG-LF-P Overview
The electronic part can be shipped overseas conveniently because it is packaged in 10-VFQFN. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. A SPDT switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. A 450mOhm internal resistance characterizes this multiplexer. To find out what the 10 pins do, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 3.3V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 2.7V. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. Operating voltages range from 3V. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. It is possible to purchase a 10-QFN (1.8x1.4) package from suppliers.
MP2735DQG-LF-P Features
Switch Circuit: SPDT
-3db Bandwidth: 50MHz
MP2735DQG-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP2735DQG-LF-P Analog Switches & Multiplexers ICs applications.
- HDTV
- Relay replacements
- Signal routing between systems
- Wireless Local Loop
- Remote Powered Equipment
- MP3 players
- SDH
- Fiber to the Home
- Optical Applications
- Cross Connects
