MP3309CGQG-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFQFN |
| Number of Pins | 10 |
| Supplier Device Package | 10-QFN (1.8x1.4) |
| Weight | 7.002332mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Max Power Dissipation | 892mW |
| Frequency | 640kHz |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Max Supply Current | 420μA |
| Max Output Voltage | 35V |
| Voltage - Output | 35V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Current - Output / Channel | 1.5A |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 640kHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Nominal Input Voltage (DC) | 3.6V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP3309CGQG-P Overview
Save board space with 10-VFQFN package. For the design of these LED drivers, 1 outputs are used.It is mounted using Surface Mount.DC DC Regulator emerges with high efficiency and reliability.The led light driver can work at -40°C~125°C TJ.There are many benefits for Backlight.On the basis of the frequency 640kHz, it operates.This configuration is built upon 10 pins.There may be undetermined failures if the voltage supply falls below 2.7V.This is mounted by Surface Mount.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.35V is the voltage output.There is a maximum value of 5.5V supply voltage supported by this device. As its minimal input voltage, it operates at a voltage of 2.7V.In the event that the maximum supply current is allowed, it reaches 5.5V.As long as the maximum supply current is less than 420μA, this device is capable of providing high efficiency.Operating temperatures should not exceed 125°C in order to ensure stable operation.Stable operation requires a temperature greater than -40°C.As long as the switching frequency is maintained at 640kHz, this electronic component is able to perform all of its functions properly.It is recommended that the output voltage be no higher than 35V.Transmissions are currently available on 1 channels.
MP3309CGQG-P Features
Available in the 10-VFQFN package
Operating temperature of -40°C~125°C TJ
Frequency of 640kHz
Switching frequency of 640kHz
MP3309CGQG-P Applications
There are a lot of Monolithic Power Systems Inc. MP3309CGQG-P LED Driver ICs applications.
- OLED power supply for portable equipment
- Other Electronic Devices
- LED backlight driver for LCD displays for portable equipment
- Down lighting
- Auxiliary lights for on-vehicle cameras
- Portable lighting
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- LED Lightings for Inspection Devices
- Replacement lamps
