MP3312GC-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, WLCSP |
| Number of Pins | 9 |
| Supplier Device Package | 9-WLCSP (1.35x1.35) |
| Weight | 65.99769mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Max Power Dissipation | 1.04W |
| Frequency | 1.2MHz |
| Number of Outputs | 2 |
| Max Output Current | 30mA |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Output Current | 30mA |
| Max Supply Current | 2mA |
| Max Output Voltage | 40V |
| Voltage - Output | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 8V |
| Max Input Voltage | 16V |
| Output Current per Channel | 30mA |
| Min Output Voltage | -300mV |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Nominal Input Voltage (DC) | 12V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP3312GC-P Overview
There is also a 9-UFBGA, WLCSP package that is used to save space on the board. For the design of this LED driver, 2 outputs are used.To mount, use Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.The LED driver has the capability of operating at a temperature of -40°C~125°C TJ.Backlight has considerable advantages.As a result, it operates on the basis of frequency 1.2MHz.This LED driver is configured with a base of 9 pins.If the voltage supply is below 2.7V, undetermined failures may occur.This is mounted by Surface Mount.It is acceptable for the supply voltage to be 5.5V.The output voltage is 38V.It is designed to provide a supply voltage of 5.5V at its maximum.As its minimal input voltage, it operates at a voltage of 8V.The maximum value of supply current is 16V.Whenever the supply current is lower than 2mA, it can provide high efficiency.It is important not to exceed 125°C in order to ensure stable operation.It is possible to supply the load with 30mA current.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.This electronic component may perform its functions fully if the switching frequency is maintained at 1.2MHz.LED drivers can deliver all benefits of 30mA due to their maximum output current.40V should be the maximum output voltage.It maintains a minimum voltage of -300mV.A total of 2 channels are currently available for transmission.
MP3312GC-P Features
Available in the 9-UFBGA, WLCSP package
Operating temperature of -40°C~125°C TJ
Frequency of 1.2MHz
Switching frequency of 1.2MHz
MP3312GC-P Applications
There are a lot of Monolithic Power Systems Inc. MP3312GC-P LED Driver ICs applications.
- Down lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Portable lighting
- Constant Voltage Power Source for portable equipment
- Other Electronic Devices
- OLED power supply for portable equipment
- Street lighting
- Down lights
