MP3312GC-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, WLCSP |
| Number of Pins | 9 |
| Weight | 65.99769mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.04W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.7V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 2 |
| Max Output Current | 30mA |
| Power Supplies | 3.7V |
| Max Supply Voltage | 5.5V |
| Output Current | 30mA |
| Max Supply Current | 2mA |
| Max Output Voltage | 40V |
| Voltage - Output | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 8V |
| Max Input Voltage | 16V |
| Output Current per Channel | 30mA |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Switching Frequency | 1.2MHz |
| Voltage - Supply (Min) | 2.7V |
| Nominal Input Voltage (DC) | 12V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP3312GC-Z Overview
To save board space, it uses the 9-UFBGA, WLCSP package. There are 2 outputs used for the design of this LED drivers.In this case, mounting method is Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Regulator.It is capable of working normally at -40°C~125°C TJ.A number of benefits are available to Backlight.In this case, it operates with terminations of 0.The configuration of the board is built around 9 pins.Under 2.7V voltage supply, undetermined failures may occur.There is a mounting of it by Surface Mount.There is no problem with the voltage of 5.5V.It produces a voltage of 38V volts.Further, it can be classified as Display Drivers based on its characteristics.The minimal input voltage is 8V.The maximum supply current is reached when 16V is reached.In order to maintain maximum efficiency, the supply current cannot exceed 2mA.30mA is the maximum amount of current that can be supplied to the load.As long as the switching frequency is maintained at 1.2MHz, this electronic component is able to perform all of its functions properly.A LED driver that operates at 30mA output current provides all the benefits of a LED driver.It is recommended that the output voltage be no higher than 40V.It maintains a -300mV voltage at its minimal output.
MP3312GC-Z Features
Available in the 9-UFBGA, WLCSP package
Operating temperature of -40°C~125°C TJ
Supply voltage of 3.7V
Switching frequency of 1.2MHz
MP3312GC-Z Applications
There are a lot of Monolithic Power Systems Inc. MP3312GC-Z LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Industrial LED Lighting: Image Recognition Devices
- Stage Lighting and Signage
- Portable lighting
- Replacement lamps
- Panel lighting
- Scanners and Handy Terminals
- Gallery lighting
- Architectural lighting
