MP3412EJ-LF-P
| Parameters | |
|---|---|
| Nominal Input Voltage (DC) | 1.2V |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 20 |
| Supplier Device Package | TSOT-23-6 |
| Operating Temperature | -20°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Applications | Backlight |
| Frequency | 1MHz |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Number of Channels | 1 |
| Max Supply Voltage | 4.4V |
| Power Dissipation | 560mW |
| Max Supply Current | 600μA |
| Max Output Voltage | 5V |
| Voltage - Output | 2.5V~5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 800mV |
| Max Input Voltage | 4.4V |
| Output Current per Channel | 1.1A |
| Min Output Voltage | 2.5V |
| Current - Output / Channel | 1.1A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1.05MHz |
| Voltage - Supply (Max) | 4.4V |
| Voltage - Supply (Min) | 0.8V |
MP3412EJ-LF-P Overview
On the board, there is also a SOT-23-6 Thin, TSOT-23-6 package that saves space.A LED driver with 1 outputs is designed.The mounting method adopted is Surface Mount.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.When the temperature is -20°C~125°C TJ, it can work normally.The benefits are considerable for Backlight.As a result, it operates based on the frequency of 1MHz.There are 20 pins on the base of this LED driver.Having a voltage supply below 0.8V can lead to undetermined failures.Surface Mount is mounted on it.4.4V is a maximum acceptable voltage for the supply.The output voltage of the device is 2.5V~5V.There is a maximum value of 4.4V supply voltage supported by this device. It operates at a voltage of 800mV as its minimal input voltage.In terms of supply current, 4.4V is the maximum value.When the maximum supply current is less than 600μA, the device is able to provide a high level of efficiency.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.It is necessary to maintain a higher operating temperature than -20°C in order to achieve stable operation.The electronic component can fully perform its functions if the switching frequency is maintained at 1.05MHz.The output voltage should not be in excess of 5V.This device maintains a minimal voltage of 2.5V.Currently, there are 1 channels available for transmission.The output type of the device is Adjustable.
MP3412EJ-LF-P Features
Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -20°C~125°C TJ
Frequency of 1MHz
Switching frequency of 1.05MHz
MP3412EJ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP3412EJ-LF-P LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- Architectural lighting
- Street lighting
- LED backlight driver for LCD displays for portable equipment
- Flicker-free LED Lighting using R1580N
- Constant Voltage Power Source for portable equipment
- General lighting
- Amusement Machines
