MP3910GK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Weight | 143.193441mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 35V |
| Input Voltage-Nom | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 288μA |
| Output Configuration | Positive, Isolation Capable |
| Output Current | 75μA |
| Voltage - Supply (Vcc/Vdd) | 7V~35V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 7V |
| Topology | Boost, Flyback, Forward Converter, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 30kHz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Duty Cycle | 95 % |
| Isolation | Isolated |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MP3910GK Overview
It comes in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 7V~35V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~125°C TJ. In this switching controller, the switch can be set to 30kHz~400kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Soft Start. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 18V. 10 pins are present on switching converter. It is recommended to use 7V as the minimum input voltage of dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 12V. normally, the dc dc regulator's output current is 75μA, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 35V. The supply current of the voltage controller is 288μA.
MP3910GK Features
Transistor Driver Outputs
Switching Frequency: 30kHz~400kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
MP3910GK Applications
There are a lot of Monolithic Power Systems Inc. MP3910GK DC to DC converter applications.
- Analog precision reference circuits
- Various precision measuring detectors
- Magnetohydrodynamic power
- Wide-range voltage regulation circuits
- Drilling machines
- Servo drive system
- Scientific testing
- CMM
- Lathes
- Industrial controllers
