MP4460DQ-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 30V |
| Output Type | Adjustable |
| Max Output Current | 2.5A |
| Operating Supply Voltage | 36V |
| Voltage - Input (Min) | 3.8V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 30V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 800mV |
| Voltage - Output (Max) | 30V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP4460DQ-LF-Z Overview
This harley voltage regulator utilizes the Tape & Reel (TR) package for optimized performance. During the development of this harley voltage regulator, 10 terminations were made. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 10-VFDFN Exposed Pad package. The voltage regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mounting is compatible with this switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~125°C TJ. There is a switching frequency of Up to 4MHz for this voltage regulator 12v. Input voltage 3.8V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. The output voltage of this voltage regulator (Min/Fixed) amounts to 0.8V volts. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 12V for operation. The adjusting voltage regulator's output voltage is maintain at 30V. The switching regulator operation of the system is controlled by 10 pins. Ideally this switch regulator should have an output voltage of about 800mV at the very least. A 2.5A A maximum output current is required to meet the switching regulator operation requirements. On the basis of the maximum output voltage of 30V, adjusting voltage regulator can be operated easily. With a maximum output voltage of 30V, DC DC switching regulator has a very high efficiency. DC-DC switching regulator with 36V supply voltage.
MP4460DQ-LF-Z Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 36V
MP4460DQ-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP4460DQ-LF-Z Voltage Regulators applications.
- Machining centers
- Electric heating, lighting
- Terrestrial set-top boxes
- Constant current circuits
- Scientific testing
- Imported equipment
- Low output voltage switching power supply circuits
- Correction machines
- Wide-range voltage regulation circuits
- Domestic water pumps
