MP5000DQ-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Supplier Device Package | 10-QFN (3x3) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 82mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 2.5W |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 10V |
| Current - Output (Max) | 5A |
| Output Configuration | High Side |
| Output Current | 4.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4.2A |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~18V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 44mOhm |
| RoHS Status | ROHS3 Compliant |
MP5000DQ-LF-P Overview
As a result, it is packaged in the form of a Tape & Reel (TR).There is a 10-VFDFN Exposed Pad package that includes it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.This LED driver has a maximum output of 5AV.It is necessary to reduce the maximum output current to 5A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.The LED driver has 82mOhm resistance.This case results in a 4.6A output current.For stable operation, the maximum operating temperature should be 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.It operates at a maximum current of 4.2A.This LED driving board can handle voltages up to 18VV.You can also run it at 10V volts if required.
MP5000DQ-LF-P Features
Resistance of 82mOhm
MP5000DQ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP5000DQ-LF-P Power Switches ICs applications.
- Hot-Swap Systems
- Hot Swap
- Telecom and Network Systems
- Solid State Drivers
- Mobile Communication Devices
- Hot Swaps
- USB3.1 Power Delivery
- Hot Swap
- Low Voltage I/O System Power
- PC Card Hot Swap
