MP5000SDQ-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Supplier Device Package | 10-QFN (3x3) |
| Weight | 7.002332mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 2.5W |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 4.2A |
| Current - Output (Max) | 5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Number of Inputs | 1 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~18V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 40mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP5000SDQ-LF-P Overview
Tape & Reel (TR) is how it's packaged.There is a 10-VFDFN Exposed Pad package that includes it.The mounting type of the LED driver is Surface Mount.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 1.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It is necessary to use the 10 pins in order to operate the LED driver.There is a maximum output of 5AV from the LED driver.To comply with the operation criteria, the maximum output current is reduced to 5A.Surface Mount is mounted in the way.For stable operation, the maximum operating temperature is 125°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 18VV.It is also capable of running at 10V volts if necessary.It is equipped with 1 input.
MP5000SDQ-LF-P Features
MP5000SDQ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP5000SDQ-LF-P Power Switches ICs applications.
- USB Ports/Hubs
- Hot Swaps
- Notebook PC
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Wireless Headsets
- HDD and SSD
- USB Power Distribution
- Mobile Communication Devices
- USB Power Distribution
