MP5002DQ-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Supply Voltage-Max (Vsup) | 4V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~4V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 44m Ω |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP5002DQ-LF-Z Overview
It is packaged in the form of a Tape & Reel (TR).Package 10-VFDFN Exposed Pad contains it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.There are Slew Rate Controlled, Status Flag features available on the LED driving board.A total of 10 terminations have been recorded.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 3A to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.This LED driver is equipped with a total of 10 pins.The LED driver is configured with a maximum supply voltage of 4V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.5V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.
MP5002DQ-LF-Z Features
Supplied from 3.3V
1 channels
MP5002DQ-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP5002DQ-LF-Z Power Switches ICs applications.
- Wearable Devices
- Solid-State Drives
- Smart Phones, Feature Phones
- HDD, SSD
- USB3.1 Power Delivery
- Various applications equipped with buttons
- Hard Disk Drives
- Low Voltage I/O System Power
- Portable Devices
- Portable Music Players
