MP5010BDQ-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Supplier Device Package | 10-QFN (3x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Interface | On/Off |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Current - Output (Max) | 5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~18V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 40mOhm |
| RoHS Status | ROHS3 Compliant |
MP5010BDQ-LF-P Overview
Cut Tape (CT) is the way it's packaged.The 10-VFDFN Exposed Pad package contains it.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts.There are Slew Rate Controlled, Status Flag features available on the LED driving board.From the lighting driver, there is a maximum output of 5AV.Maximum output current falls to 5A when operation criteria are met.In order to ensure stable operation, a maximum operating temperature of 125°C°C should be maintained.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.There is a maximum voltage of 18VV that it can handle.It can also be used at 3Vvolts if needed.
MP5010BDQ-LF-P Features
MP5010BDQ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP5010BDQ-LF-P Power Switches ICs applications.
- USB Power Distribution
- Storage Drives
- Gaming
- PDAs
- Hot Swaps
- Hot Swap
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
- Notebook and Tablet Computers
- Hot Swap
