MP5087GG-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VFQFN |
| Number of Pins | 12 |
| Supplier Device Package | 12-QFN (2x2) |
| Weight | 21.99923mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Feature | Load Discharge, Power Good, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 10mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 1.6W |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 7A |
| Interface | On/Off |
| Current - Output (Max) | 7A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~5.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 10mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MP5087GG-P Overview
As you can see, it's packaged in the way of a Cut Tape (CT).In the 12-VFQFN package, it is included.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of 3V~5.5V.Voltage output is P-Channel volts at maximum.In terms of features, the LED driving board has Load Discharge, Power Good, Slew Rate Controlled.In order to operate, the 12 pins are used.The maximum output of the LED driving board is 7AV.This results in the maximum output current dropping to 7A to meet the operation criteria.Surface Mount is mounted in the way of this LED driving board.The LED driver has 10mOhm resistance.A maximum operating temperature of 125°C°C is required for stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.
MP5087GG-P Features
Resistance of 10mOhm
MP5087GG-P Applications
There are a lot of Monolithic Power Systems Inc. MP5087GG-P Power Switches ICs applications.
- USB Power Distribution
- PC Card Hot Swap
- PC Cards
- USB Power Distribution
- Low Voltage I/O System Power
- Wireless/Networking Cards
- HDD and SSD
- Portable Video Game Players
- Smartphone and PDA
- Portable/Handheld Devices
