MP5092GD-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 18-VFQFN |
| Number of Pins | 18 |
| Supplier Device Package | 18-QFN (2x3) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 12mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 7.5A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Current - Output (Max) | 7.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 10mOhm |
| RoHS Status | ROHS3 Compliant |
MP5092GD-P Overview
As you can see, it's packaged in the way of a Cut Tape (CT).The 18-VFQFN package contains it.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.The lighting driver has Load Discharge, Slew Rate Controlled features.The operation is carried out using the 18 pins.There is a maximum output of 7.5AV from the LED driver.As a result, the maximum output current is reduced to 7.5A in order to meet the operation requirements.Lighting drivers with 12mOhm resistance are used.The maximum operating temperature of 125°C°C allows for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.You can also run it at 500mV volts if required.
MP5092GD-P Features
Resistance of 12mOhm
MP5092GD-P Applications
There are a lot of Monolithic Power Systems Inc. MP5092GD-P Power Switches ICs applications.
- Set-Top Boxes
- Low Voltage I/O System Power
- Hot Swaps
- HDD and SSD
- Notebook PC
- USB Protection
- Hot-Swap Systems
- Mobile Communication Devices
- Smart Phones, Feature Phones
- USB Power Distribution
