MP6001DN-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 100V |
| Output Voltage | 150V |
| Output Type | Adjustable |
| Operating Supply Voltage | 6V |
| Voltage - Input (Min) | 10V |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 1mA |
| Output Configuration | Positive or Negative, Isolation Capable |
| Current - Output | 2A Switch |
| Max Output Voltage | 150V |
| Voltage - Output (Min/Fixed) | -0.5V |
| Topology | Boost, Flyback, Forward Converter, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | -500mV |
| Max Output Power | 15W |
| Length | 4.902mm |
| Width | 3.905mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP6001DN-LF Overview
For optimal performance, this voltage regulator uses the Tube package. In this voltage regulator, 8 terminations are present. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. In order to save space, this harley voltage regulator is available in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package. In this case, DC DC switching regulator has 1 outputs configured to it. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. There is a switching regulator that is compatible with the Surface Mount mounting. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. A DC-DC switching regulator such as this one switches at 200kHz~500kHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to -0.5V. It features maximum design flexibility due to dc to dc voltage regulator's 2A Switch output current. There is a maximum input voltage of 100V for this voltage regulator 12v. Its 260 peak reflow temperature makes this regulator essentially indestructible. An input voltage of 20V is required for switching regulator operation. A voltage of 150V volts can be produced by voltage regulator. In order for this switching regulator to work properly, the output voltage should be at least -500mVV. It provides the adjusting voltage regulator's maximal output voltage of 150V. An input voltage of 6V is used to operate this harley voltage regulator. DC-DC switching regulator operating on 1mA supply voltage.
MP6001DN-LF Features
1 outputs
Peak reflow temperature (Cel) of 260
Operating supply voltage of 6V
MP6001DN-LF Applications
There are a lot of Monolithic Power Systems Inc. MP6001DN-LF Voltage Regulators applications.
- Product burn-in
- Industrial robots
- Motor controller circuits
- Direct power supply system
- PSRR circuits
- Arc suppression circuits
- Sink circuits
- Thermal power
- Wide-range voltage regulation circuits
- Balance equipment
