MP62055EJ-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Supplier Device Package | TSOT-23-5 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 115mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -20°C |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 115mOhm |
| RoHS Status | ROHS3 Compliant |
MP62055EJ-LF-P Overview
It is packaged in the form of a Cut Tape (CT).There is a SOT-23-5 Thin, TSOT-23-5 package that includes it.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.It is recommended to set the temperature to -20°C~85°C TA in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.It is equipped with Status Flag features.There is a maximum output of 500mAV from the LED driver.Maximum output current falls to 500mA when operation criteria are met.115mOhm resistance is present in the lighting driver.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.The LED driver must work at a minimum temperature of -20°C degrees Celsius in order to remain reliable.There is a maximum supply voltage of 5.5VV that it is capable of handling.You can also run it at 2.7V volts if required.
MP62055EJ-LF-P Features
Resistance of 115mOhm
MP62055EJ-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP62055EJ-LF-P Power Switches ICs applications.
- USB Power Distribution
- Storage (HDDs, SSDs)
- Portable GPS Device
- Portable Devices
- Handheld Devices
- Gaming
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Portable/Handheld Devices
- PC Card Hot Swap
