MP6205DH-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP6205DH-LF-Z Overview
Tape & Reel (TR) is how it's packaged.It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.There are Status Flag features available on the LED driving board.The termination count is 8.In order to operate, 8 pins are used.Currently, there are 1 functions associated with the lighting driver.Maximum output current falls to 500mA when operation criteria are met.With a supply voltage of 5V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.There are 8 pins in total on this board.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 2.7V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 1 channels in total.
MP6205DH-LF-Z Features
Supplied from 5V
1 channels
MP6205DH-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP6205DH-LF-Z Power Switches ICs applications.
- USB Ports/Hubs
- Various applications equipped with buttons
- Portable Music Players
- Low Voltage I/O System Power
- Hard Disk Drives
- Smartphone and PDA
- Portable GPS Device
- Wireless Modem Data Cards
- Hot-Swap Systems
- Solid State Drivers
