MP6211DH-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Supplier Device Package | 8-MSOP-EP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2009 |
| Feature | Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 130mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Outputs | 1 |
| Max Output Current | 1A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 1A |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90mOhm |
| RoHS Status | ROHS3 Compliant |
MP6211DH-LF-P Overview
It is package in Cut Tape (CT) case.There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package that includes it.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.There are Status Flag features available on the LED driving board.Its maximum output voltage is 1AV.This operation requires the maximum output current to be decreased to 1A.In this case, there is 130mOhm resistance in the LED driving board.When this case is used, the output current is set to 1A.The maximum operating temperature of 85°C°C allows for stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It is possible to use a voltage as low as 2.7V V as a power supply voltage.
MP6211DH-LF-P Features
Resistance of 130mOhm
MP6211DH-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP6211DH-LF-P Power Switches ICs applications.
- Mobile Communication Devices
- Wireless Modem Data Cards
- HDD, SSD
- Various applications equipped with buttons
- Hot Swaps
- Portable Devices
- Portable Music Players
- Smart Phones, Feature Phones
- Notebook PC
- USB Ports/Hubs
