MP6211DN-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP6211DN-LF Overview
The package is in the form of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.By default, it is set to output 1.Operation is based on Not Required supply voltage.There are Status Flag features available on the LED driving board.The termination count is 8.The LED driver has 1 functions.The maximum output current must drop to 1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The lighting driver is mounted in the direction of Surface Mount.There are 8 pins in total on this board.Currently, the LED driving board has a resistance of 130mOhm ohms.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.In order to maximize efficiency, the supply voltage should be set at 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.The minimum input voltage is 2.7V volts.
MP6211DN-LF Features
Supplied from 5V
Resistance of 130mOhm
1 channels
MP6211DN-LF Applications
There are a lot of Monolithic Power Systems Inc. MP6211DN-LF Power Switches ICs applications.
- USB Power Distribution
- USB Ports/Hubs
- Portable GPS Device
- Wireless Headsets
- USB Power Distribution
- Smart Phones, Feature Phones
- PC Cards
- Various applications equipped with buttons
- Notebook PC
- Gaming
