MP6212DN-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP6212DN-LF Overview
It is packaged in the manner of a Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package.The lighting driver is mounted in the Surface Mount position.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.As far as features are concerned, the LED driving board has Status Flag.It contains 8 terminations.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.The supply voltage of 5V is conducive to high efficiency.The lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 8 pins.It has a resistance of 130mOhm.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 1 channels are available for you to choose from.The supply voltage should be set at 5.5V for best efficiency.Voltage input is limited to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.
MP6212DN-LF Features
Supplied from 5V
Resistance of 130mOhm
1 channels
MP6212DN-LF Applications
There are a lot of Monolithic Power Systems Inc. MP6212DN-LF Power Switches ICs applications.
- Portable Devices
- Hard Disk Drives
- Handheld Devices
- Hot-Swap Systems
- PC Card Hot Swap
- Notebook PC
- Portable GPS
- Wireless/Networking Cards
- USB Power Distribution
- Set-Top Boxes
