banner_page

MP62130ES-LF

PMIC 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Monolithic Power Systems Inc.
  • Nocochips NO: 541-MP62130ES-LF
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 264
  • Description: PMIC 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature -20°C~85°C TA
Packaging Tube
Published 2010
JESD-609 Code e3
Feature Load Discharge, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
JESD-30 Code R-PDSO-G8
Number of Outputs 1
Qualification Status Not Qualified
Max Output Current 500mA
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2.7V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Rds On (Typ) 90m Ω
Length 4.9mm
Width 3.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MP62130ES-LF Overview


The LED driver's packaged as a Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -20°C~85°C TA.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.A lighting driver with Load Discharge, Status Flag features is available.It consists of 8 terminations in total.It has 1 functions.This results in the maximum output current dropping to 500mA to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.The LED driving board is equipped with a total of 8 pins.In this case, Vsup (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 2.7V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.

MP62130ES-LF Features


Supplied from 5V
1 channels

MP62130ES-LF Applications


There are a lot of Monolithic Power Systems Inc. MP62130ES-LF Power Switches ICs applications.

  • Smartphone and PDA
  • Various applications equipped with buttons
  • Storage Drives
  • Hot Swap
  • Hot Swap
  • Solid State Drivers
  • PDAs
  • Storage (HDDs, SSDs)
  • PC Card Hot Swap
  • PC Cards

Write a review

Note: HTML is not translated!
    Bad           Good