MP62160DD-LF-P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TFDFN Exposed Pad |
| Supplier Device Package | 8-QFN (2x3) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Feature | Load Discharge, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 130mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 2.3W |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85mOhm |
| RoHS Status | ROHS3 Compliant |
MP62160DD-LF-P Overview
Tape & Reel (TR) is the way it's packaged.There is a 8-TFDFN Exposed Pad package that includes it.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.Features of the lighting driver are Load Discharge, Status Flag.In terms of output, the lighting driver can provide a maximum of 2A V.This results in the maximum output current dropping to 2A to meet the operation criteria.In this case, there is 130mOhm resistance in the LED driving board.For maximum efficiency, the supply voltage should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.The minimum input voltage is 2.7V volts.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.
MP62160DD-LF-P Features
Resistance of 130mOhm
MP62160DD-LF-P Applications
There are a lot of Monolithic Power Systems Inc. MP62160DD-LF-P Power Switches ICs applications.
- Portable GPS
- USB3.1 Power Delivery
- Notebook PC
- HDD, SSD
- Hot Swap
- Storage (HDDs, SSDs)
- Set-top-box
- Smartphone and PDA
- Hard Disk Drives
- PC Card Hot Swap
