MP62160DH-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62160DH-LF-Z Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.The lighting driver has Load Discharge, Status Flag features.In total, there are 8 terminations.The LED driver has 1 functions.In order to meet the operation criteria, the maximum output current drops to 2A.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is equipped with a total of 8 pins.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.The total number of channels is 1.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Voltage input is limited to 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
MP62160DH-LF-Z Features
Supplied from 5V
1 channels
MP62160DH-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62160DH-LF-Z Power Switches ICs applications.
- Portable Devices
- Low Voltage I/O System Power
- Set-Top Boxes
- Wireless Modem Data Cards
- HDD, SSD
- USB Power Distribution
- Hot Swap
- Smart Phones, Feature Phones
- Handheld Devices
- PC Cards
