MP62170ES-LF
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 75m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MP62170ES-LF Overview
The LED driver's packaged as a Tube.In the 8-SOIC (0.154, 3.90mm Width) package, it is included.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -20°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board is powered by a voltage of Not Required.It is equipped with Status Flag features.A total of 8 terminations have been found in it.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.A supply voltage of 5V leads to high efficiency.A total of 8 pins are included in this LED driver.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 2.7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.
MP62170ES-LF Features
Supplied from 5V
1 channels
MP62170ES-LF Applications
There are a lot of Monolithic Power Systems Inc. MP62170ES-LF Power Switches ICs applications.
- PDAs
- Smartphone and PDA
- Hot Swap
- USB3.1 Power Delivery
- Hot Swaps
- Set-top-box
- Portable Music Players
- USB Ports/Hubs
- Wearable Devices
- Portable GPS Device
