MP62171ES-1-LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.4W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 75m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62171ES-1-LF Overview
Tube is how it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -20°C~85°C TA to ensure reliable operation.As a default, the output is set to 1.To operate, it needs a supply voltage of Not Required.In terms of features, the LED driving board has Load Discharge, Status Flag.In total, there are 8 terminations.For operation, we use the 8 pins.Currently, the lighting driver has a total of 1 functions.The maximum output current is reduced to 1.5A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.8 pins are equipped with it.Currently, the LED driving board has a resistance of 130mOhm ohms.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.It is recommended to set the supply voltage to 5.5V for optimum efficiency.A maximum input voltage of 5.5V volts can be applied to it.It has a 2.7V volt minimum input voltage.
MP62171ES-1-LF Features
Supplied from 5V
Resistance of 130mOhm
1 channels
MP62171ES-1-LF Applications
There are a lot of Monolithic Power Systems Inc. MP62171ES-1-LF Power Switches ICs applications.
- Hard Disk Drives
- USB3.1 Power Delivery
- Portable GPS
- Hot Swaps
- PC Card Hot Swap
- Set-Top Boxes
- Gaming
- Portable Music Players
- PC Cards
- USB Power Distribution
