MP6231DH-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Number of Inputs | 1 |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP6231DH-LF-Z Overview
Tape & Reel (TR) is how it's packaged.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has a total of 2 outputs.A voltage of Not Required is used to power it.The lighting driver has Status Flag features.The termination count is 8.During operation, the 8 pins are used.It has 1 functions.Maximum output current falls to 500mA when operation criteria are met.Using a voltage of 5V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 8 pins.In this case, Vsup (maximum supply voltage) is set to 5.5V.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.It has 1 inputs.
MP6231DH-LF-Z Features
Supplied from 5V
2 channels
MP6231DH-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP6231DH-LF-Z Power Switches ICs applications.
- PC Card Hot Swap
- Solid State Drivers
- Wireless/Networking Cards
- Hard Disk Drives
- Low Voltage I/O System Power
- PC Cards
- Solid-State Drives
- USB Ports/Hubs
- Portable Devices
- USB3.1 Power Delivery
