MP6232DH-LF-Z
| Parameters | |
|---|---|
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
MP6232DH-LF-Z Overview
It is packaged in the form of a Tape & Reel (TR).In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.It uses a supply voltage of Not Required to operate.A lighting driver with Status Flag features is available.There are 8 terminations in it.The operation is performed through the 8 pins.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 5V.It is positioned in the direction of Surface Mount.A total of 8 pins are present on it.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.A supply voltage of 5.5V is recommended for maximum efficiency.As far as input voltage goes, its maximum is 5.5V volts.Input voltage must be at least 2.7V volts.A total of 1 inputs are available.
MP6232DH-LF-Z Features
Supplied from 5V
2 channels
MP6232DH-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP6232DH-LF-Z Power Switches ICs applications.
- USB Power Distribution
- Smart Phones, Feature Phones
- Notebook PC
- Hard Disk Drives
- Set-Top Boxes
- Hot Swap
- USB Protection
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Hot-Swap Systems
