MP62340DH-1-LF-Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP62340DH-1-LF-Z Overview
It is packaged in the form of a Tape & Reel (TR).It is included with the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package as well.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.As far as features are concerned, the LED driving board has Load Discharge, Status Flag.The termination count is 8.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.As long as the supply voltage is 5V, high efficiency can be achieved.It is equipped with a total of 8 pins.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.You can select from 2 channels.A supply voltage of 5.5V is recommended for maximum efficiency.This LED driving board can accept voltages up to 5.5V volts as an input.There is a minimum input voltage of 2.7V volts for this LED driver.
MP62340DH-1-LF-Z Features
Supplied from 5V
2 channels
MP62340DH-1-LF-Z Applications
There are a lot of Monolithic Power Systems Inc. MP62340DH-1-LF-Z Power Switches ICs applications.
- USB Protection
- HDD, SSD
- Hot Swap
- Hot-Swap Systems
- Notebook and Tablet Computers
- Set-Top Boxes
- Wireless Modem Data Cards
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Wireless/Networking Cards
